My skiff! 11'10"
Moderators: GoodOyster, Cr0ck1
Re: My skiff! 11'10"
2" schedule 40 PVC with a T at both ends, filled with spray foam. Makes it rigid and it will float if you drop it in the water.
- flhuntfish
- Junior Assistant Scout Master
- Posts: 2574
- Joined: Thu Aug 20, 2009 5:05 pm
- Hunt or Fish: Equally Both
- Location: Gainesville, FL
- Contact:
Re: My skiff! 11'10"
sometimes you still need a push pole rad! sometimes shallow water with weeds doesnt mix with a trolling motor
- HeneryHawk
- scout
- Posts: 106
- Joined: Wed May 12, 2010 7:23 pm
- Hunt or Fish: Fisher
- Location: Brooksville
Re: My skiff! 11'10"
I have a idea on that too. My dad use to have a 2"x6" bolted across it for the trolling motor but I was thinking of using a piece of 3"x3" aluminum angle trimmed up. I want try flats fishing but boat will probably end up in freshwater 99% of the time.rad07h wrote:You can also put a trolling motor mount on the front for a trolling motor
Last edited by HeneryHawk on Mon Sep 27, 2010 7:26 pm, edited 1 time in total.
Re: My skiff! 11'10"
MAn you did one fine job with that boat.
- DONY1
- Junior Assistant Scout Master
- Posts: 2594
- Joined: Sun Dec 07, 2008 1:18 pm
- Hunt or Fish: Equally Both
- Location: Homestead, Fl.
Re: My skiff! 11'10"
For a cheap push pole you can also get a 20' closet rod at HD or Lowes. You can get a cheap plastic T and end point on the web from a few different guys on some of the shallow water sites. I think a closet rod is the same size as 1" pvc and you can make your own ends also. On my gheenoe I got some velcro ties at walmart for like 2 bucks and they work good to strap the pole to the rub rail mounts for a bimini top. The pvc and foam idea sounds good but if the foam gets wet I would think it's gonna get heavy real quick. And pushing a boat with a heavy pole all day sucks. JMHO Also a smaller pipe may be easier to use all day. Maybe 1" or 1 1/4" sch. 80 pvc would work and with the ends capped it should float no problem and be rigid enough. I've also heard of guys using the telescopic aluminum poles used to clean pools.
- nachogrande
- Wood Badger
- Posts: 5197
- Joined: Tue Aug 18, 2009 2:13 pm
- Location: Spring Hill, Fl
- Contact:
- strunes
- Tenderfoot
- Posts: 388
- Joined: Mon Nov 02, 2009 7:39 pm
- Hunt or Fish: Equally Both
- Location: Dunedin/Homosassa
Re: My skiff! 11'10"
HeneryHawk wrote:The back of the boat sits about 8" deep and the front just a couple of inches. I've never been out on the flats so I didn't know how big the waves are or if people will try to swamp the boat with their wakes. I did take it in the Weeki Wachee and it runs pretty shallow, I was thinking I could raise the motor to give me another 3" or 4" of clearance. I might try to attend a boating coarse or ride with someone else in their boat first so I know what to look for.
If you can run the Weekie you will do fine in the flats, just watch the rocks. North of New Port Richey, the bottom is very rocky and you can really screw up a boat and motor, trust me I learned the hard way... Also 99.99% of boaters are cool and they will not try to swamp you with a wake.
It is what it is!
- HeneryHawk
- scout
- Posts: 106
- Joined: Wed May 12, 2010 7:23 pm
- Hunt or Fish: Fisher
- Location: Brooksville
Re: My skiff! 11'10"
We went up the weeki wachee Sat. boy with all the tubers and swimmers it was hard to come back down it. In front of the Christian Camp there had to be 30 kids in the water about 5-6' apart and none would move to let you thru. It was the one time I wish the little motor had reverse.strunes wrote:HeneryHawk wrote:The back of the boat sits about 8" deep and the front just a couple of inches. I've never been out on the flats so I didn't know how big the waves are or if people will try to swamp the boat with their wakes. I did take it in the Weeki Wachee and it runs pretty shallow, I was thinking I could raise the motor to give me another 3" or 4" of clearance. I might try to attend a boating coarse or ride with someone else in their boat first so I know what to look for.
If you can run the Weekie you will do fine in the flats, just watch the rocks. North of New Port Richey, the bottom is very rocky and you can really screw up a boat and motor, trust me I learned the hard way... Also 99.99% of boaters are cool and they will not try to swamp you with a wake.
- GoodOyster
- Ain't as Good as I Once Was , But I'm As Good Once As I Ever Was!
- Posts: 3902
- Joined: Thu Dec 04, 2008 12:28 am
- Location: Sarasota, FL
- Contact:
Re: My skiff! 11'10"
Find you a good piece of bamboo for the push pole. Light, strong, floats, and environmentally friendly! Can double as a frog gig handle!
"My God! How little do my countrymen know what precious blessings they are in possession of, and which no other people on earth enjoy!"
~Thomas Jefferson
~Thomas Jefferson
- HeneryHawk
- scout
- Posts: 106
- Joined: Wed May 12, 2010 7:23 pm
- Hunt or Fish: Fisher
- Location: Brooksville
Re: My skiff! 11'10"
Well took the little skiff out to Bayport today. Its tippy, and with the way I have the rear seat alittle off center it makes the boat sit crooked. I think a deck front and rear are in order. We caught a bunch of pinfish and small grunts for bait. I wish I could have caught a little bit bigger grunt. I lost a nice Red as soon as I seen him, he let go as if he was never hooked. Caught plenty of hardhead catfish... I need tips on how to fish flats because I do not know what I am doing. Other boaters were nice and respectful, with the exception of one that blow by me about 30' away and his wake came over the side because I did not turn into the wake quick enough. All in all a great day with Dad. Born and raised in Brooksville and never tried fishing out there, now I see what I was missing.
-
- LIfe Scout
- Posts: 2184
- Joined: Tue May 18, 2010 6:54 pm
- Location: Moore County, NC
- Contact:
Re: My skiff! 11'10"
Very nice boat! You did a greta job on it. Some of our fishermen will surely jump in and give you some advise. Wish I could help... Sorry!
Who is online
Users browsing this forum: No registered users and 1 guest