made a few
Moderators: GoodOyster, Cr0ck1
- bellyacher
- First Class Scout
- Posts: 755
- Joined: Sun Oct 14, 2012 12:23 am
made a few
Had a few euros sitting around doing nothing. So I did something. Found some old cypress fence panels in the woods cut them down and made a small panel. I cut down the skull to just a skull cap and mounted. Had this 1/4 sawed peace of ash sitting around for a few years so I made another. Had the brass plates made of were and when deer was taken
You do not have the required permissions to view the files attached to this post.
Be polite, be professional, BUT have a plan to kill everybody you meet
- Cr0ck1
- ADMIN HOG STALKER
- Posts: 14886
- Joined: Sun Nov 02, 2008 1:49 pm
- Hunt or Fish: Equally Both
- Location: Mossy Oak Swamp Bottom..
- Contact:
Re: made a few
Looks good! Ive been trying to find a good ga lease with no luck.
Sent from Mossy Oak Swamp Bottom
Sent from Mossy Oak Swamp Bottom
I live back in da woods ya see, My woman and da kids and da dogs and me!
-Hank Williams Jr.
Click here for the Beagler Outdoors YouTube Page
Click Here for the Beagler Outdoors FaceBook Page!
Click Here to join the FOHAF.COM facebook fan page
Click here to become a FOHAF.COM Contributer!
Pinellas Pig Possee ProStaff
-Hank Williams Jr.
Click here for the Beagler Outdoors YouTube Page
Click Here for the Beagler Outdoors FaceBook Page!
Click Here to join the FOHAF.COM facebook fan page
Click here to become a FOHAF.COM Contributer!
Pinellas Pig Possee ProStaff
Re: made a few
Great job man! I like the euro mounts. One of these days I'm going to get one done. :>) I have to kill something worth mounting though!!
- treefarmer
- Ordeal
- Posts: 1399
- Joined: Wed Feb 09, 2011 3:37 pm
- Location: LA(lower Alabama) Fl. panhandle
Re: made a few
bellyacher,
Thanks for showing this type of mount. If I may, I'd like to back up what you have posted and displayed here on FOHAF.
My father-in-law showed me how to cut antlers to create the same as you are showing 50 years ago this coming November. He said it was easy to do and it cost nothing to create a nice looking display without spending a lot on taxidermy work.
So many folks just discard the antlers because the cost of professional work, maybe because it's not a "big boy". I always figured if a buck was killed, he ought to be remembered for more than being made into the best wild meat there is. We always try to get a picture and then save the antlers as you've described.
I have several sets of antlers in our living room and with over 50 years of deer huntin', I have only one shoulder mount, the rest are mounted as you have described. Some on single board plaques, several on some salvaged heart cypress boards from an old friends demolished home place and many, many more simply screwed to the utility room wall at ceiling height. Then there are wads of them out in my shop, wired to meat hooks but all have been cut where they could be mounted on a plaque or directly to a wall.
Here are a few pictures showing how some of them look.
Treefarmer
Thanks for showing this type of mount. If I may, I'd like to back up what you have posted and displayed here on FOHAF.
My father-in-law showed me how to cut antlers to create the same as you are showing 50 years ago this coming November. He said it was easy to do and it cost nothing to create a nice looking display without spending a lot on taxidermy work.
So many folks just discard the antlers because the cost of professional work, maybe because it's not a "big boy". I always figured if a buck was killed, he ought to be remembered for more than being made into the best wild meat there is. We always try to get a picture and then save the antlers as you've described.
I have several sets of antlers in our living room and with over 50 years of deer huntin', I have only one shoulder mount, the rest are mounted as you have described. Some on single board plaques, several on some salvaged heart cypress boards from an old friends demolished home place and many, many more simply screwed to the utility room wall at ceiling height. Then there are wads of them out in my shop, wired to meat hooks but all have been cut where they could be mounted on a plaque or directly to a wall.
Here are a few pictures showing how some of them look.
Treefarmer
You do not have the required permissions to view the files attached to this post.
Re: RE: Re: made a few
Those are some fine looking bucks!treefarmer wrote:bellyacher,
Thanks for showing this type of mount. If I may, I'd like to back up what you have posted and displayed here on FOHAF.
My father-in-law showed me how to cut antlers to create the same as you are showing 50 years ago this coming November. He said it was easy to do and it cost nothing to create a nice looking display without spending a lot on taxidermy work.
So many folks just discard the antlers because the cost of professional work, maybe because it's not a "big boy". I always figured if a buck was killed, he ought to be remembered for more than being made into the best wild meat there is. We always try to get a picture and then save the antlers as you've described.
I have several sets of antlers in our living room and with over 50 years of deer huntin', I have only one shoulder mount, the rest are mounted as you have described. Some on single board plaques, several on some salvaged heart cypress boards from an old friends demolished home place and many, many more simply screwed to the utility room wall at ceiling height. Then there are wads of them out in my shop, wired to meat hooks but all have been cut where they could be mounted on a plaque or directly to a wall.
Here are a few pictures showing how some of them look.
Treefarmer
"we quell the storm and ride the thunder"-betio bastards
- bellyacher
- First Class Scout
- Posts: 755
- Joined: Sun Oct 14, 2012 12:23 am
Re: made a few
Treefarmer, Thanks for the input. That's how use poor boys have to do it. I do not have any deer taxidermy mounts. Those 2 are the 2 biggest Ive ever got. If I ever get a 8pt or larger Ill have it mounted. I also have these hangin around and a few others here n there, I too beleave all deer Ive taken evens does are trophies to me.
You do not have the required permissions to view the files attached to this post.
Be polite, be professional, BUT have a plan to kill everybody you meet
- Cr0ck1
- ADMIN HOG STALKER
- Posts: 14886
- Joined: Sun Nov 02, 2008 1:49 pm
- Hunt or Fish: Equally Both
- Location: Mossy Oak Swamp Bottom..
- Contact:
Re: made a few
Looks good.. gotta get my woods truck done so i can go get me some wall hangers!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I live back in da woods ya see, My woman and da kids and da dogs and me!
-Hank Williams Jr.
Click here for the Beagler Outdoors YouTube Page
Click Here for the Beagler Outdoors FaceBook Page!
Click Here to join the FOHAF.COM facebook fan page
Click here to become a FOHAF.COM Contributer!
Pinellas Pig Possee ProStaff
-Hank Williams Jr.
Click here for the Beagler Outdoors YouTube Page
Click Here for the Beagler Outdoors FaceBook Page!
Click Here to join the FOHAF.COM facebook fan page
Click here to become a FOHAF.COM Contributer!
Pinellas Pig Possee ProStaff
Who is online
Users browsing this forum: No registered users and 2 guests